In recent years, Smart Grid technologies such as Advanced Metering, Pervasive Control, Automation and Distribution Management have created numerous control and optimization opportunities and challenges for smart distribution networks. Availability of Co-Gen loads and/or Electric Vehicles (EVs) enable these technologies to inject reactive power into the grid by changing their inverter’s operating mode without considerable impact on their active power operation. This feature has created considerable opportunity for distribution network planners to explore if EVs could be used in the distribution network as reliable VAR suppliers. It may be possible for network operators to employ some EVs as VAR suppliers for future distribution grids. This paper proposes an innovative Smart Grid-based Volt-VAR Optimization (VVO) engine, capable of minimizing system power loss cost as well as the operating cost of switched Capacitor Banks, while optimizing the system voltage using an improved Genetic Algorithm (GA) with two levels of mutation and two levels of crossover. The paper studies the impact of EVs with different charging and penetration levels on VVO in different operating scenarios. Furthermore, the paper demonstrates how a typical VVO engine could benefit from V2G’s reactive power support. In order to assess V2G impacts on VVO and test the applicability of the proposed VVO, revised IEEE-123 Node Test Feeder in presence of various load types is used as case study., Article, Published. Received 24 May 2014, Revised 23 July 2015, Accepted 29 July 2015, Available online 8 August 2015.
Vapour barriers were originally intended to keep building assemblies from getting wet, but they can sometimes end up preventing assemblies from drying out. An innovative new product to manage moisture accumulation in the building envelope, however, may be able to address both issues: while the product acts as a vapour barrier under most conditions, it also allows excess moisture to escape. The Canadian Construction Materials Centre (CCMC) set out to determine whether this product can serve as a vapour barrier and an air barrier system and whether it conformed to the intent of applicable building code requirements. In collaboration with NRC-IRC researchers, CCMC developed a testing protocol for its evaluation, which was based on laboratory testing requirements for vapour diffusion, air leakage control and durability., Article, Published.
Proceedings of the 2015 Workshops at the Twenty-Ninth AAAI Conference on Artificial Intelligence in Austin, USA, 2015. Communication involves transferring information from one agent to another. An intelligent agent, either human or machine, is often able to choose to hide information in order to protect their interests. The notion of information hiding is closely linked to secrecy and dishonesty, but it also plays an important role in domains such as software engineering. In this paper, we consider the ethics of information hiding, particularly with respect to intelligent agents. In other words, we are concerned with situations that involve a human and an intelligent agent with access to different information. Is the intelligent agent justified in preventing a human user from accessing the information that they possess? This is trivially true in the case where access control systems exist. However, we are concerned with the situation where an intelligent agent is able to using a reasoning system to decide not to share information with all humans. On the other hand, we are also concerned with situations where humans hide information from machines. Are we ever under a moral obligation to share information with a computional agent? We argue that questions of this form are increasingly important now, as people are increasingly willing to divulge private information to machines with a great capacity to reason with that information and share it with others., Conference paper, Published.
Proceedings of 2010 Eighth Annual International Conference on Privacy Security and Trust (PST) in Ottawa, ON, Canada, 17-19 Aug. 2010. Cryptographic protocols are usually specified in an informal, ad hoc language, with crucial elements, such as the protocol goal, left implicit. We suggest that this is one reason that such protocols are difficult to analyse, and are subject to subtle and nonintuitive attacks. We present an approach for formalising and analysing cryptographic protocols in a theory of action, specifically the situation calculus. Our thesis is that all aspects of a protocol must be explicitly specified. We provide a declarative specification of underlying assumptions and capabilities in the situation calculus. A protocol is translated into a sequence of actions to be executed by the principals, and a successful attack is an executable plan by an intruder that compromises the specified goal. Our prototype verification software takes a protocol specification, translates it into a high-level situation calculus (Golog) program, and outputs any attacks that can be found. We describe the structure and operation of our prototype software, and discuss performance issues., Conference paper, Published.
Study Design: Observational cross-sectional study. Objectives: Body mass index (BMI), measured as a ratio of weight (Wt) to the square of height (Wt/Ht(2)), waist circumference (WC) and waist-to-height ratio (WHtR) are common surrogate measures of adiposity. It is not known whether alternate scaling powers for height might improve the relationships between these measures and indices of obesity or cardiovascular disease (CVD) risk in individuals with spinal cord injury (SCI). We aimed to estimate the values of 'x' that render Wt/Ht(x) and WC/Ht(x) maximally correlated with dual energy x-ray absorptiometry (DEXA) total and abdominal body fat and Framingham Cardiovascular Risk Scores. Setting: Canadian public research institution. Methods: We studied 27 subjects with traumatic SCI. Height, Wt and body fat measurements were determined from DEXA whole-body scans. WC measurements were also obtained, and individual Framingham Risk Scores were calculated. For values of 'x' ranging from 0.0 to 4.0, in increments of 0.1, correlations between Wt/Ht(x) and WC/Ht(x) with total and abdominal body fat (kg and percentages) and Framingham Risk Scores were computed. Results: We found that BMI was a poor predictor of CVD risk, regardless of the scaling factor. Moreover, BMI was strongly correlated with measures of obesity, and modification of the scaling factor from the standard (Wt/Ht(2)) is not recommended. WC was strongly correlated with both CVD risk and obesity, and standard measures (WC and WHtR) are of equal predictive power. Conclusion: On the basis of our findings from this sample, alterations in scaling powers may not be necessary in individuals with SCI; however, these findings should be validated in a larger cohort., Peer-reviewed article, Published. Received 25 February 2014; revised 1 May 2014; accepted 1 August 2014; published online 30 September 2014.
Seeds of milk thistle, Silybum marianum (L.) Gaertn., are used for treatment and prevention of liver disorders and were identified as a high priority ingredient requiring a validated analytical method. An AOAC International expert panel reviewed existing methods and made recommendations concerning method optimization prior to validation. A series of extraction and separation studies were undertaken on the selected method for determining flavonolignans from milk thistle seeds and finished products to address the review panel recommendations. Once optimized, a single-laboratory validation study was conducted. The method was assessed for repeatability, accuracy, selectivity, LOD, LOQ, analyte stability, and linearity. Flavonolignan content ranged from 1.40 to 52.86 % in raw materials and dry finished products and ranged from 36.16 to 1570.7 μg/mL in liquid tinctures. Repeatability for the individual flavonolignans in raw materials and finished products ranged from 1.03 to 9.88 % RSD, with HorRat values between 0.21 and 1.55. Calibration curves for all flavonolignan concentrations had correlation coefficients of >99.8 %. The LODs for the flavonolignans ranged from 0.20 to 0.48 μg/mL at 288 nm. Based on the results of this single-laboratory validation, this method is suitable for the quantitation of the six major flavonolignans in milk thistle raw materials and finished products, as well as multicomponent products containing dandelion, schizandra berry, and artichoke extracts. It is recommended that this method be adopted as First Action Official Method status by AOAC International., Peer-reviewed article, Published. Received 1 June 2015; Revised 14 July 2015; Accepted 16 July 2015; Published online 31 July 2015.
Proceedings of the 16th International Workshop on Non-Monotonic Reasoning (NMR 2016), Cape Town, South Africa; April 22-24, 2016. We are interested in belief revision involving conditional statements where the antecedent is almost certainly false. To represent such problems, we use Ordinal Conditional Functions that may take infinite values. We model belief change in this context through simple arithmetical operations that allow us to capture the intuition that certain antecedents can not be validated by any number of observations. We frame our approach as a form of finite belief improvement, and we propose a model of conditional belief revision in which only the "right" hypothetical levels of implausibility are revised., Conference paper, Published.
Halophilic bacteria use a variety of osmoregulatory methods, such as the accumulation of one or more compatible solutes. The wide diversity of compounds that can act as compatible solute complicates the task of understanding the different strategies that halophilic bacteria use to cope with salt. This is specially challenging when attempting to go beyond the pathway that produces a certain compatible solute towards an understanding of how the metabolic network as a whole addresses the problem. Metabolic reconstruction based on genomic data together with Flux Balance Analysis (FBA) is a promising tool to gain insight into this problem. However, as more of these reconstructions become available, it becomes clear that processes predicted by genome annotation may not reflect the processes that are active in vivo. As a case in point, E. coli is unable to grow aerobically on citrate in spite of having all the necessary genes to do it. It has also been shown that the realization of this genetic potential into an actual capability to metabolize citrate is an extremely unlikely event under normal evolutionary conditions. Moreover, many marine bacteria seem to have the same pathways to metabolize glucose but each species uses a different one. In this work, a metabolic network inferred from genomic annotation of the halophilic bacterium Halomonas elongata and proteomic profiling experiments are used as a starting point to motivate targeted experiments in order to find out some of the defining features of the osmoregulatory strategies of this bacterium. This new information is then used to refine the network in order to describe the actual capabilities of H. elongata, rather than its genetic potential., Peer-reviewed article, Published. Received: September 20, 2016; Accepted: November 17, 2016; Published: January 12, 2017.
Exciting yet challenging times lie ahead. The electrical power industry is undergoing rapid change. The rising cost of energy, the mass electrification of everyday life, and climate change are the major drivers that will determine the speed at which such transformations will occur. Regardless of how quickly various utilities embrace smart grid concepts, technologies, and systems, they all agree onthe inevitability of this massive transformation. It is a move that will not only affect their business processes but also their organization and technologies., Final article published
Background and Aims A study is made by computation of the interplay between the pattern formation of growth catalysts on a plant surface and the expansion of the surface to generate organismal shape. Consideration is made of the localization of morphogenetically active regions, and the occurrence within them of symmetry-breaking processes such as branching from an initially dome-shaped tip or meristem. Representation of a changing and growing three-dimensional shape is necessary, as two-dimensional work cannot distinguish, for example, formation of an annulus from dichotomous branching. Methods For the formation of patterns of chemical concentrations, the Brusselator reaction-diffusion model is used, applied on a hemispherical shell and generating patterns that initiate as surface spherical harmonics. The initial shape is hemispherical, represented as a mesh of triangles. These are combined into finite elements, each made up of all the triangles surrounding each node. Chemical pattern is converted into shape change by moving nodes outwards according to the concentration of growth catalyst at each, to relieve misfits caused by area increase of the finite element. New triangles are added to restore the refinement of the mesh in rapidly growing regions. Key Results The postulated mechanism successfully generates: tip growth (or stalk extension by an apical meristem) to ten times original hemisphere height; tip flattening and resumption of apical advance; and dichotomous branching and higher-order branching to make whorled structures. Control of the branching plane in successive dichotomous branchings is tackled with partial success and clarification of the issues. Conclusions The representation of a growing plant surface in computations by an expanding mesh that has no artefacts constraining changes of shape and symmetry has been achieved. It is shown that one type of pattern-forming mechanism, Turing-type reaction-diffusion, acting within a surface to pattern a growth catalyst, can generate some of the most important types of morphogenesis in plant development., Peer-reviewed article, Published. Received: 26 July 2007; Returned for revision: 5 October 2007; Accepted: 15 October 2007; Published electronically: 28 November 2007.
Proceedings of 4th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII-4) 2009, 22-24 July 2009, Zurich, Switzerland. A comparative experimental study was conducted to investigate the effectiveness of fiber reinforcement as a non-corrosive alternative for welded-wire reinforcement in slabs on grade. Six full-scale slabs-on-grade, reinforced with various combinations of WWM (Welded Wire Mesh), polymeric macro-synthetic fibers (PMF) and cellulose fibers were tested under a centrally concentrated load. Their ductility and load carrying capacity were evaluated and compared. Based on the results of this study, it seems that high dosages of polymeric macrofibers can be used to successfully reinforce concrete slabs. Given that the use of PMF eliminates the possibility of corrosion of reinforcement, this may be a superior option. Furthermore, it seems low dosages of fibers act as an ineffective replacement for WWM. Low dosages of PMF and cellulose fiber when added on their own, or in combination with each other were found to be insufficient in providing sufficient ductility or load carrying capacity compared to the control slab when subjected to the load test. Slabs reinforced with cellulose fiber had a poor mechanical response in comparison to WWM and therefore cellulose fiber on its own is not recommended., Conference paper, Published.
A study was carried out to investigate the use of Sprayed Fiber Reinforced Polymer (SFRP) for retrofit of timber beams. A total of 10-full scale specimens were tested. Two different timber preservatives and two different bonding agents were investigated. Strengthening was characterized using load deflection diagrams. Results indicate that it is possible to enhance load-carrying capacity and energy absorption characteristics using the technique of SFRP. Of the two types of preservatives investigated, the technique appears to be more effective for the case of creosote-treated specimens, where up to a 51% improvement in load-carrying capacity and a 460% increase in the energy absorption capacity were noted. Effectiveness of the bonding agent used was dependent on the type of preservative the specimen had been treated with., Peer-reviewed article, Published. Received 26 July 2010; Revised 8 October 2010; Accepted 12 October 2010.