BCIT Thesis and other Required Graduate Degree Works | BCIT Institutional Repository

BCIT Thesis and other Required Graduate Degree Works

Pages

The absorption and scattering characteristics of interior living walls
Installation of interior living walls is increasing rapidly due to their beauty, biophilic design and their potential contribution to indoor environmental quality. However, there is little understanding of the specific effect they have on the acoustics of a room. To advance the state of practice, this interdisciplinary study explores the acoustical characteristics of interior living walls to determine how they can be used to positively benefit room acoustic by reducing excess noise and reverberation. Specifically, the objective of the research is to measure the acoustical characteristics of the interior living wall in order to determine their absorption coefficient, scattering coefficient, and the parameters that most significantly impact these coefficients. First, a series of measurements are carried out in a reverberation chamber to examine random-incidence absorption by considering parameters such as carrier type, moisture content, vegetation type, and substrate. In addition, both absorption and scattering coefficients are examined by considering various vegetation types and coverage. The findings from empirical measurements facilitate a sensitivity analysis, with the use of the commercial software Odeon, of the absorption and scattering coefficients. Next, the empirical absorption and scattering coefficients are used on a model, developed in the commercial software Odeon, to see the effect of interior living walls on room acoustics. The aim of this study is to evaluate the application of interior living walls as a sustainable and acoustically beneficial material for buildings of any kind., Acoustical characteristics of interior living walls, Sound absorption coefficient, Sound scattering coefficient, Odeon software, Room acoustics, Living wall
Assessment of natural ventilation design and efficacy in a net-zero energy house
Achieving acceptable indoor environmental quality and thermal comfort in buildings can be difficult without relying on energy intensive mechanical equipment. When the climate conditions permit, natural ventilation could potentially help minimize the reliance on mechanically conditioned air; however, natural ventilation is rarely engineered. Houses are typically designed as fully enclosed climate systems in which the connection with the outdoor environment is rarely planned. Unlike in commercial or specialized buildings, houses are not designed with many energy conservation measures in mind. Reconnecting them with the outdoors has a great potential to increase thermal comfort and reduce reliance on mechanical systems. With such a connection to the dynamic weather conditions of the outdoors, it is difficult for architects to choose beneficial design elements to be included in the construction of their houses. Knowing which elements work and to what extent under particular conditions can potentially achieve increased thermal comfort using little or no energy. This research aims to offer a thorough assessment of a case study house and determine the effects of the design choices made by the architect of the house. This research may help architects know the risk factors affecting natural ventilation design in a systematic manner; and in doing so, enable quantifying the benefits of natural ventilation to meet the design goals of maintaining satisfactory indoor conditions without the use of air conditioning, particularly in the summer. A constructed net-zero case study house located in the Pacific marine climate of Canada was used to develop the proposed research. The house had been designed by an architect to rely solely on natural ventilation for cooling during the summer and much of the spring and fall. The house was instrumented and its indoor environment was monitored for a period of several months in 2014 to collect data to evaluate the effectiveness of design choices made, including the effect of a large atrium and the air flow characteristics of the windows intended by the architect to deliver most of the ventilation. Recorded data showed the house performed commendably and this was confirmed through evidence from the home owners. To aid in the understanding of the dynamics of the Harmony House, whole-building, multizone air flow network modeling and computational fluid dynamics (CFD) modeling of the house was developed and calibrated with monitored data and testing. The models were used to assess the indoor air quality and further quantify the natural ventilation of the house, as well as test hypothetical situations that were once considered for the house. Simulations revealed some additional insight into the design choices that were implemented in the house and showed that further technologies intended to increase ventilation were unnecessary and some instead, reduced ventilation through the house.
Assessment of natural ventilation using whole building simulation methodological framework
Natural ventilation is a passive alternative to provide both indoor air quality and thermal comfort for the building’s occupants with low energy use. But at the same time, it is challenging for the building designers to implement natural ventilation strategies due to its complexity and highly dynamic behaviour, especially when it is compared with the mechanically ventilated buildings. Nevertheless, the use of naturally ventilated buildings is increasing along with the use of passive strategies, but depending on the complexity of the project, the designer still use rules of thumb for the implementation of natural ventilation strategies instead of a more comprehensive simulation-based approach. In theory, whole building simulation models (WBSM) are becoming viable tools to support natural ventilation design, particularly in the early stages of the project where the impacts of measures to implement a natural ventilation strategy are magnified. However, the only “evidence” of such level of support comes from individual case-study projects. Nevertheless, there is a lack of validation through measurement of the effectiveness of natural ventilation design in real buildings. This research will shed light into the “inner-workings” of natural ventilation models in WBSM to answer fundamental questions such as the following: How is wind data processed? How are envelope openings characterized? How are internal openings modelled? When and how is air buoyancy modelled in spaces? How are the coupled thermal and fluid mass transfers modelled to reflect the dynamic thermal responses of constructions and airflows? Therefore, a methodological framework is developed in order to provide the necessary knowledge for natural ventilation assessment. This framework is based on simulation (WBSM) and field testing. The proposed framework is tested in an existing landmark building in Vancouver. A WBSM of that building is developed, calibrated, and used to analyze how different factors that compose an integrated natural ventilation strategy (like the building shape, window shading, thermal mass, indoor spaces functionality and connectivity, and local climate) influence the thermal comfort of its occupants., Natural ventilation, Thermal comfort, Adaptive model, Whole building simulation models (WBSM)
Assessment of selected six stigma tools to improve food safety outcomes in a fresh-cut produce plant
Using a carrot processing line in a fresh-cut produce processing plant, it was found that Failure Mode and Effects Analysis (FMEA) provided a more accurate portrayal of the risk that is associated with a fresh-cut processing line than that provided by a conventional Hazard Analysis. This conclusion is based on the fact that FMEA clearly indicates the residual risk that is left after risk-mitigating activities are in place, and identifies the variables responsible for the remaining risk factor. This methodology also requires examination of the risk associated with all product and process changes that are involved in processing, with an integral part of this approach being the need for continuous improvement. FMEA, therefore, has the potential to decrease the likelihood that food processors will sell contaminated food to consumers because they have not detected when their biological hazards are not being adequately controlled, a classical type 2 error. It was also demonstrated that FMEA required a rating of the hazard detection method which drives the need to examine detection methods for hazards. In this example, a Run Chart was used to indicate changes in the microbiological status of a fresh-cut processing line. While the Run Chart successfully indicated this change, the information gained was not useful for showing the presence of a significant biological hazard. It was determined that this occurred because the information was not provided sufficiently in time to prevent the sale of contaminated carrots to customers. Use of a Defect Opportunity Checklist (DOC) was assessed to detect defects in a sanitation process; in effect, whether or not planned activities were being followed. This information was subsequently analyzed and an improvement plan was developed. While the DOC successfully performed this function, it was not adopted by the processing site because the current methods for verifying the sanitation indicated that the process was acceptable. This suggests that there may be limited acceptance of FMEA and DOC by food processors if it is perceived they perceive that their hazards are fully controlled by their existing food safety methodologies.
Comparing soil nematode composition in bluebunch wheatgrass P. spicata root to the occurrence of invasive plants C. stoebe and L. dalmatica
The viability of native bunchgrass ecosystems throughout the PPxh BEC subzone and in Kenna Cartwright Park (KCP) in Kamloops B.C. are under threat by invasive plants. Once established, invasive plants are difficult to eradicate and can predominate the landscape. I collected soil samples from a relatively undisturbed bunchgrass reference site composed of native bluebunch wheatgrass (Pseudoroegneria spicata), and I collected soil samples from a bunchgrass site occupied by the invasive plants, spotted knapweed (Centaurea stoebe) and dalmatian toadflax (Linaria dalmatica), to compare the soil nematode communities. My results reveal differences in the community-level biodiversity and abundance of soil nematodes between sites. The Maturity Index and the Plant Parasitic Index indicate that the native bunchgrass site had a “Structured” soil food web and that the site occupied by invasive plants had a “Basal” soil food web. My results indicate soil nematodes are useful as bioindicators of soil properties and these data provide useful criteria to help prioritize sites for ecological restoration., Nematology, Invasive plants, Pseudoroegneria spicata, Biological indicators, Ecological restoration
The effect of mowing and hand removal on the regrowth rate of Himalayan blackberry (Rubus armeniacus)
Himalayan blackberry (Rubus armeniacus Focke) is an invasive species in the Pacific Northwest. Mowing and hand removal are two of the common treatments used for controlling Himalayan blackberry. I examined the effectiveness of mowing, hand removal, and control treatments by measuring the mean number of stem and mean stem length during a growing season. Treatments were applied on March 2017. Bi-weekly sampling was from April to August 2017. Data were analyzed with a two-factor split-plot Analysis of Variance (ANOVA) test. The overall trend showed no statistically significant difference between mowing and hand removal treatments in one growing season. Integrated treatments (e.g. mowing + hand removal + planting) are recommended to be used to effectively reduce Himalayan blackberry cover because one removal treatment showed to be insufficient to eliminate Himalayan blackberry., Himalayan blackberry
The effects of canopy closure on precipitation throughfall
Since the 1860s the watershed of Spanish Bank Creek has experienced many ecological disturbances due to extensive old-growth logging and urban development. Most notably, these disturbances have altered the vegetative composition and hydrology throughout the watershed. The historic old-growth forest has been replaced by species typical of earlier seral stages, as well as invasive species such as English ivy (Hedera helix). This disturbed vegetation mosaic is characterized by an arrested ecological trajectory that perpetuates degraded conditions. Urban development has eliminated over a third of the historic length of Spanish Bank Creek and storm drains were installed to direct residential drainage into the stream. The combination of a disturbed forest and degraded hydrology intensifies runoff and associated sediment transport, and decreases the hydraulic retention time of the watershed. This has led to a significant decline in abundance of chum, coho, and cutthroat salmonids in Spanish Bank Creek. Previous research has established how trees partition precipitation into throughfall, stemflow, and interception, however there are few studies examining the effects of canopy closure on throughfall within the context of ecological restoration. Thus, the objective of this paper is to determine if increasing canopy closure can be used as a restoration model to decrease throughfall, and consequently increase the hydraulic retention time of the watershed. Results indicated that greater canopy closure was associated with decreased precipitation throughfall. From these results I formulated a restoration goal and several treatments that would increase canopy closure, and also ameliorate the degraded vegetative composition and hydrology of the watershed. The restoration treatments prescribed in this paper constitute five years of physical enhancements from which self-sustaining biological processes will continue to restore ecosystem function and structure. Successful implementation of these restoration treatments will positively affect regional biota, as well as users of the Pacific Spirit Regional Park who come to recreate, learn, and connect.
Evaluation of educational-software and paper-based resources for teaching logical-thinking skills to grade six and seven students
Guided by the objectives of investigating whether there were any differences between the effectiveness of the paper-based materials and educational software in teaching logical-thinking skills and transferring those skills to new problems and determining the efficacy of the paper-based materials and educational software in teaching logical-thinking skills and transferring those skills to new problems, a mixed-method research approach was used. A qualitative assessment was conducted to ascertain the appropriateness of the materials and a quantitative assessment was done using a pre-test, post-test, experimental design to assess the effectiveness of the materials in teaching logical-thinking skills. Based on the qualitative analysis, after the initial materials were modified through the information gained from the pilot students and changes were put in as suggested by the reviewers through their iterative reviews of the materials, it was determined that the reviewers considered that the events of instruction addressed in this intervention (gaining attention, informing the learner of the learning outcome, presenting the material, providing learning guidance, eliciting the performance, providing feedback, assessing performance, and enhancing retention and transfer) provided the attributes needed to effectively teach the logical-thinking skills of classification, analogical reasoning, sequencing, patterning, and deductive reasoning. For the quantitative analysis, one-way ANOVAs were performed to compare an experimental group learning from educational software (32 students), an experimental group learning from paper-based materials (32 students), and a control group (32 students). Given significance was found between the groups, Tukey HSD Post Hoc Tests were done. For each test, the subjects taught through educational software and those taught through paper-based materials scored significantly higher in logical-thinking ability than the control group, except for the subskills of patterning and deductive reasoning for the subjects learning through educational software, and the skill of deductive reasoning for the subjects learning through paper-based materials. For the transfer learning scores, the subjects learning through paper-based materials scored significantly higher than the control group. There were no significant differences between subjects taught through paper-based materials and those taught through educational software on any test. Based on paired samples t-test results, the subjects learning from educational software and those learning from paper-based materials had significant percentage gains on all of their pre-test to post-test scores, except the subjects learning through paper-based materials showed no significant gains on the sequencing and deductive-reasoning skills., Logical thinking, Instructional design, Qualitative analysis, Quantitative analysis
Field experiment on the effect of interior living walls on indoor environmental quality
Indoor environmental quality (IEQ) has multiple aspects such as: indoor air quality (IAQ), acoustics, thermal conditions, lighting, and ventilation. This research focuses on indoor air quality and acoustics and studies the effect of interior living walls on indoor air quality and acoustical characteristics of rooms through field monitoring and experiment. Previous laboratory studies have been carried out at the British Columbia Institute of Technology (BCIT) and the University of British Columbia (UBC) on the effect of living walls on acoustics and indoor air quality. This study, examines the acoustical effect of living walls (background noise level, reverberation time, and speech articulation) as well as the effect of living walls on indoor air quality (Carbon Dioxide, Volatile Organic Compound, and endotoxin) through field measurements in the BC Hydro Theater at the Centre for Interactive Research in Sustainability (CIRS) at UBC. Existing predictive models are verified using field data, and are used to predict the effect of interior living walls on indoor air quality and acoustics in an adjoining lab., Interior living walls
Field investigation of moisture buffering potential of gypsum board in a residential setting under varying operating conditions in a marine climate
Indoor relative humidity is of critical importance to maintain at acceptable and stable levels for building occupants’ health and comfort, energy efficiency, and building envelope durability. The main factors that determine the indoor relative humidity levels in a building are ventilation rate and scheme, moisture sources and sinks, and moisture buffering effect of materials. As buildings enclosures are retrofitted for improvements in water shedding and energy performance, they are becoming more airtight. Such a retrofit measure without addressing increased ventilation needs will lead to significant building envelope and indoor air quality problems. In this thesis, this point is highlighted in a reference residential building, occupied by low-income, high occupancy residents. This research aims to determine the effect of moisture buffering of unfinished gypsum board as a passive means to regulate indoor humidity in a field experiment setting. Two identical test buildings exposed to real climatic loads are used to evaluate the moisture buffering effect of gypsum board for different simulated occupant densities and ventilation strategies. The effect of passive and active indoor moisture management measures are compared between 8 test cases. Implications on indoor air quality and ventilation heat loss are also discussed. The results show that moisture buffering is an effective means of passively regulating indoor relative humidity levels in Vancouver’s marine climate, when coupled with adequate ventilation as recommended by ASHRAE, even under high moisture loading. When working in tandem with adequate ventilation, moisture buffering helps to regulate changes in relative humidity levels by reducing humidity peaks. This in effect decreases dew point temperatures, and the likelihood of condensation and microbial growth. 4 ventilation schemes are provided as active measures to manage indoor moisture coupled with moisture buffering in the field experiment. The results show competing benefits when it comes to managing indoor air quality, indoor humidity, and minimizing ventilation heat loss. Time-controlled ventilation is effective at maintaining relative humidity at acceptable levels for thermal comfort. Time-controlled ventilation also provides considerable savings in ventilation heat losses of 20% in comparison to constant ventilation. However, CO2 levels are exceeded beyond what is acceptable for good indoor air quality for 50% of the monitoring period. Conversely, demand-controlled ventilation schemes produce favourable indoor air quality based on CO2 levels, while compromising indoor humidity levels.
A field study on quality of three First Nation homes on the Squamish Urban Reserve of West Vancouver
Three new homes in the First Nations Squamish urban reserve were instrumented, tested, and monitored for a period of one year. Performance data was obtained from these homes and analyzed to help assess their quality and improve their performance. From the field study, the houses performed reasonably well. However, there is large room for improvements. Considering construction durability, the built-in moisture in the houses dried well. However, as expected, the moisture in the attics was high and improvements are recommended. The monitoring also confirmed that north facing walls take more time to dry and remain wet in some areas, despite the fact that the monitored year was one of the driest years in record, as reported by Environment Canada. Dangerously high moisture levels were also recorded in a few wall locations, believed to be caused by construction deficiencies at window sills and wall penetrations. In general, wall orientation and obstructions to solar radiation play a major role in the moisture balance of walls. This study confirmed that north-facing walls have higher moisture content, which also takes longer to dry out. South-facing and east-facing walls have lower moisture content (i.e. due to higher solar radiation and higher wall temperature to promote evaporation). The effect of external obstructions (i.e. large trees) to solar radiation was seen in the high moisture content of the west walls that was close to that of north walls. However, as reported in this study, poor construction detailing overpowers orientation on impacting wall moisture, and is the major source of concern for rain penetration. Unfortunately, wood-frame construction is unforgiving to construction deficiencies, and maximum care must be exercised to protect all details and wall penetrations from rain. Considering the indoor environment, in general the conditions were within acceptable limits; however, indoor conditions are greatly affected by occupants’ behaviours (e.g. opening windows in cold days). Particular problems arising from tobacco smoking and wood carving could not be measured. From the field study and computer simulations, it is recommended to make the houses more airtight to improve durability, energy efficiency, and possibly indoor air quality. It is also recommended to decouple the ventilation system from the house heating system to improve its ventilation reliability., Monitoring First Nation homes, Indoor air quality and energy efficiency, CO2 contaminant dispersion models, Ventilation
Geochemical and biological response of an intertidal ecosystem to localized restoration efforts
Geochemical and biological attributes of three intertidal areas in the Squamish Estuary with different levels of disturbance (low, medium, and high) were assessed to determine short-­term ecosystem responses to localized restoration efforts conducted one year previously on a former log handing site. Sediment and macroinvertebrate variables were analyzed among sites to characterize the ecosystems response and provide insight on the nature and process of an assisted successional trajectory. Invertebrate composition and biomass were lowest on the site with the highest level of disturbance. The high disturbance site also contained the highest percentage of fine sand (0.0067 mm to 0.25 mm). This confirms that in the short term there are distinct site responses to disturbance and ameliorative restoration efforts – even in a highly dynamic estuarine environment. The medium site contained more invertebrates than the low disturbance site indicating that something other than localized disturbance is affecting the invertebrate community on the low site. All sites exhibited a less-­rich and less diverse invertebrate community than that of historical records (circa. 1970-­1980). Invertebrate community in the east delta today is more typical of estuarine environments with higher salinity levels -­ which indicates more widespread levels of disturbance throughout the Estuary is affecting the study sites. This study highlights the importance of considering temporal and spatial scales when setting restoration goals, objectives and creating monitoring plans. Additional monitoring of sediment, invertebrate, and other variables on restored and reference sites is recommended to characterize typical recolonization and reassembly attributes of restoring intertidal estuaries in coastal British Columbia. This would provide evidence and rigor in determining effective restoration techniques and management strategies for a critical and increasingly threatened ecosystem., Macroinvertebrates, Restoration, Sediment, Benthic ecology, Estuaries, Intertidal flats

Pages