BCIT Citations Collection | BCIT Institutional Repository

BCIT Citations Collection

Description

Collection of published works from BCIT researchers, faculty, and instructors.

Pages

The impact of step targeting during normal gait for persons wearing either a SACH or a dynamic-response foot
This study compared dynamic-response feet to SACH feet with respect to factors influencing unilateral transtibial amputee balance and ability to adapt to variable terrains. This was done by measuring ground reaction forces for 30% perturbations of step length during level walking. These perturbations resulted in either a lengthening or a shortening of one step length by 30% of the normal step length. Subjects walked along a 12 metre walkway and across two flush mounter force platforms while forces were recorded for both feet. Three experimental conditions were completed with each foot type: normal step length, short step length (reduced by 30% from normal), and long step length (increased by 30% from normal)., Research report, Published.
Impact of V2G on real-time adaptive Volt/VAr optimization of distribution networks
Proceeding of IEEE ElectricalPower and Energy Conference (EPEC 2013), Aug. 2013, Halifax, Canada. Deployment of Smartgrid downstream features such as Smart Metering, pervasive control and Distributed Management Systems has brought great opportunities for distribution network planners to optimize the network in more precise methods. Moreover, the advent of Electric Vehicles (EVs) has brought more opportunities for grid optimization. Recent studies stipulate that EVs are able to inject reactive power into the grid by changing their inverter's operating mode. This paper primarily discusses a real-time adaptive Volt/VAr Optimization (VVO) engine, designed to minimize system apparent power losses, optimize voltage profiles, and reduce the operating costs of Switched Capacitor Banks of the grid. The paper goes on to study the impact of EVs on the distribution network VVO, taking into account different EV charging and penetration levels and checks the validity of the proposed algorithm by employing revised IEEE-37 Node Test Feeder in presence of various load types as a case study., Conference paper, Published.
Improved dynamic friction models for simulation of one-dimensional and two-dimensional stick-slip motion
In many mechanical systems, the tendency of sliding components to intermittently stick and slip leads to undesirable performance, vibration, and control behaviors. Computer simulations of mechanical systems with friction are difficult because of the strongly nonlinear behavior of the friction force near zero sliding velocity. In this paper, two improved friction models are proposed. One model is based on the force-balance method and the other model uses a spring-damper during sticking. The models are tested on hundreds of lumped mass-spring-damper systems with time-varying excitation and normal contact forces for both one-dimensional and two-dimensional stick-slip motions on a planar surface. Piece-wise continuous analytical solutions are compared with solutions using other published force-balance and spring-damper friction models. A method has been developed to set the size of the velocity window for Karnopp’s friction model. The extensive test results show that the new force-balance algorithm gives much lower sticking velocity errors compared to the original method and that the new spring-damper algorithm exhibits no spikes at the beginning of sticking. Weibull distributions of the sticking velocity errors enable maximum errors to be estimated a priori., Technical papers, Published. Received February 03, 2000; Revised August 17, 2000.
Improving students' engagement with large-team software development projects
Proceedings from the 23rd Annual ACM Conference on Innovation and Technology in Computer Science Education. Computer science and technology education should provide not only a strong theoretical foundation, but also problem solving, and communication and teamwork skills to prepare the students for careers. Including projects in curricula is a norm in many disciplines. However, projects are generally individual or based on small teams (two to five members). This paper presents my approach to teaching a capstone undergraduate computer technology course at the British Columbia Institute of Technology (BCIT) in the Computer System Technology (CST) Program in which a large class of students (maximum 22), organized into small teams work together and apply Agile software development practices to design, implement, integrate and test a large project. This model provides students with unique learning opportunities and experiences, as well as improving their soft skills, engagement and motivation., Peer reviewed, Conference paper, Published.
Indoor humidity levels of houses in Pacific coastal climate
9th International Conference on Indoor Air Quality, Ventilation & Energy Conservation (IAQVEC), October 23-26, 2016, Songdo, South Korea. This project studied the relative humidity and indoor temperature variations in three houses in the pacific coastal climates. The houses have been monitored for one month in each four different seasons under different size of occupants, temperature variation and living conditions. These three houses represent different air tightness, number of occupants and floor size. The temperature and RH data loggers are used in every room in each house to better understand which rooms in a certain living conditions are more susceptible to moisture related problems. In addition, three existing models (European Indoor Class Model, ASHRAE 160P simple and intermediate models) are used to generate the indoor humidity level and the calculated values are compared to the measured field data., Conference paper, Published.
The influence of AFO design on walking speed, gait symmetry, comfort and stability of hemiplegic subjects
"This thesis is submitted in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Prosthetics and Orthotics"., Thesis, Published.
Initial evaluation of the FreeWheel™ wheelchair attachment
Proceedings of Rehabilitation Engineering and Assistive Technology Society of North America Annual Conference 2011. The FreeWheel™ wheelchair attachment was developed to overcome the burden that front casters pose to manual wheelchairs., Conference paper, Published.
Integrated life-cycle design of building enclosures
In spite of the progress in developing methods and tools to support sustainable building design, there is still a lack of a formal approach to bridge the "no man’s land” gap between the traditional building engineering disciplines, and between these and the architecture, to achieve the level of building integration required for sustainability. This paper presents an integration framework that aims at facilitating the inclusion of life-cycle considerations in the design process from the outset, so that materials and systems are selected not only from environmentally friendly resources, but most importantly, to match service life performance expectations. The framework describes an iterative methodology to evaluate these expectations in practice, which is based on an understanding and modeling of the dynamics of the built environment to which materials, components, and systems are exposed. Quantitative methods and test protocols can be incorporated into the framework for assessing function-performance aspects of alternative solutions. Due to its complexity stemming from its inherent exposure to variable environmental loads and its multi-functionality, the framework focuses on addressing the life cycle of the building enclosure system. It is expected that the organization of the underlying principles of building life-cycle performance described in this paper will become a knowledge core that will facilitate a more integrated treatment of buildings in research, education, and practice., Peer reviewed, Peer reviewed article, Received 29 October 2010 ; Revised 13 January 2011 ; Accepted 18 January 2011 ; Available online 27 January 2011., Life-cycle, Service life, Building science, Building enclosure, Building integration
Intelligent Micro Grid research at BCIT
Proceedings of IEEE EPEC’08 Conference, Vancouver, Oct 2008. This paper describes a major research initiative by British Columbia Institute of Technology for the construction of an Intelligent Micro Grid on its campus in Burnaby, BC, Canada., Conference paper, Published.
Interaction with an edu-game
We present the results of a study that explored the emotions experienced by students during interaction with an educational game for math (Heroes of Math Island). Starting from emotion frameworks in affective computing and education, we considered a larger set of emotions than in related research. For emotion labeling, we started from a standard methodology that relies on trained judges to report emotions over 20-s intervals, however, we asked judges to report all observed emotions in each interval, as opposed to only choosing one, as is standard practice. This variation allows us to discuss the appropriateness of this interval for emotion labeling. We present a detailed analysis of interrater reliability, both aggregated and over individual students, that considers not only labeling agreement among judges in terms of emotion type, but also with respect to the number of emotions detected. We also provide an analysis based on in-depth one-to-one interviews with judges, to gain insights on the challenges they encountered in labeling emotions., Peer reviewed, Peer reviewed article, First Online: 07 January 2016., Learning, Educational games, Emotion labeling, Interrater agreement, Interviewing judges, Affective states
Interaction with an edu-game: a detailed analysis of student emotions and judges' perceptions
We present the results of a study that explored the emotions experienced by students during interaction with an educational game for math (Heroes of Math Island). Starting from emotion frameworks in affective computing and education, we considered a larger set of emotions than in related research. For emotion labeling, we started from a standard methodology that relies on trained judges to report emotions over 20-s intervals, however, we asked judges to report all observed emotions in each interval, as opposed to only choosing one, as is standard practice. This variation allows us to discuss the appropriateness of this interval for emotion labeling. We present a detailed analysis of interrater reliability, both aggregated and over individual students, that considers not only labeling agreement among judges in terms of emotion type, but also with respect to the number of emotions detected. We also provide an analysis based on in-depth one-to-one interviews with judges, to gain insights on the challenges they encountered in labeling emotions., Not peer reviewed, Article
Introductory mathematics for computer science
4th custom edition., Not peer reviewed, Book, Published.
Introductory mathematics for computer science
3rd custom edition for BCIT., Published., Peer reviewed, Book
Introductory mathematics for computer science
Taken from: Basic technical mathematics : with calculus, metric version, seventh edition by Allyn J. Washington, Logic and computer design fundamentals, second edition, updated by M. Morris Mano and Charles R. Kime. Custom edition for British Columbia Institute of Technology., Book, Published., Peer reviewed
Investigation of the moisture buffering potential of magnesium oxide board
Research report submitted to Peter Francis, President, MAGO Building Products Ltd in April 2016. Passive humidity control in buildings can be achieved by incorporating materials with moisture buffering potential in that these materials absorb moisture at peak times and give off the stored up moisture at low moisture production times thereby stabilizing the interior relative humidity. Some of the advantages of this phenomenon include but are not limited to energy savings, improvement of thermal comfort and perceived air quality. As such, it is necessary to investigate different materials for their moisture buffering capabilities. As part of product development, the moisture buffering characteristics of Magnesium oxide board (Magnesia board) is experimentally investigated. Other considerations such as the impact of surface finishing and ventilation are also assessed. The experiment is done by monitoring twin buildings termed the Whole Building Performance Research Laboratory (WBPRL) while measuring the relative humidity evolution in time. One is set as the reference building and finished with gypsum wallboard owing to its wide industry use. The other is set as the reference building and covered with the Magnesia board. Both buildings are first validated under non-hygroscopic conditions to ensure similar hygrothermal loading and operation of both buildings. Next, four tests are conducted to simulate surface treatments, ventilation effects, and occupancy density. For each test run, four cases are created for different surface treatment configurations. From the test, it is found that magnesia board and gypsum demonstrate similar moisture buffering characteristics. In the as-in service case where the gypsum wallboard is painted with latex paint, as it is the current common practice, and magnesia board with the company specified paint, the later demonstrates slightly better moisture buffering due to the high permeability surface treatment., Research report, Published.
Iterated belief change
Proceedings of the International Joint Conference on Artificial Intelligence (IJCAI-05) in Edinburgh, Scotland, 2005. We use a transition system approach to reason about the evolution of an agent’s beliefs as actions are executed. Some actions cause an agent to perform belief revision and some actions cause an agent to perform belief update, but the interaction between revision and update can be nonelementary. We present a set of basic postulates describing the interaction of revision and update, and we introduce a new belief evolution operator that gives a plausible interpretation to alternating sequences of revisions and updates., Conference paper, Published.

Pages