BCIT Citations Collection | BCIT Institutional Repository

BCIT Citations Collection

Pages

Smart grid adaptive energy conservation and optimization engine utilizing Particle Swarm Optimization and Fuzzification
This paper aims to present a novel smart grid adaptive energy conservation and optimization engine for smart distribution networks. The optimization engine presented in this paper tries to minimize distribution network loss, improve voltage profile of the system and minimize the operating cost of reactive power injection by switchable shunt Capacitor Banks using Advanced Metering Infrastructure data. Moreover, it performs Conservation Voltage Reduction (CVR) and minimizes transformer loss. To accurately weight the optimization engine objective function sub-parts, Fuzzification technique is employed in this paper. Particle Swarm Optimization (PSO) is applied as Volt-VAR Optimization (VVO) algorithm. Substantial benefits of the proposed energy conservation and optimization engine include but not limited to: adequate accuracy and speed, comprehensive objective function, capability of using AMI data as inputs, and ability to determine weighting factors according to the cost of each objective sub-part. To precisely test the applicability of proposed engine, 33-node distribution feeder is used as case study. The result analysis shows that the proposed approach could lead distribution grids to achieve higher levels of optimization and efficiency compared with conventional techniques., Article, Published. Received 27 November 2015, Revised 13 April 2016, Accepted 16 April 2016, Available online 26 April 2016.
Smart grid adaptive volt-VAR optimization
In recent years, smart grid technologies such as Distribution Management Systems (DMS) and Advanced Metering Infrastructure (AMI) have created remarkable opportunities for distribution grids in terms of operation, control and optimization. The advent of AMI has created considerable amount of data that can be used in optimization applications. Other smart grid functionalities could increase the performance of energy conservation and optimization solutions. As such, this paper aims to review the main requirements of two important smart grid adaptive energy conservation and optimization solutions called Volt-VAR Optimization and Conservation Voltage Reduction, in terms of control, measurement, communication and standards for grids., Article, Published. Received 13 May 2016, Revised 13 September 2016, Accepted 22 September 2016, Available online 3 October 2016.
Smart Grid and ICT's role in its evolution
While there is debate around the real causes of Climate Change, Green House Gas (GHG) emissions as a result of widespread use of fossil-based fuels by major economies around the world has been thought of playing a significant role in perpetuating the negative impacts of the phenomenon known as Climate Change. Regardless of whether GHG emissions is the sole culprit of the unusual, and often devastating changes in the climate patterns around the world, the global understanding has been sought over mitigating further dependence on fossil fuels by the developed countries. What further accentuates that desire, is not only the political and social instability of the regions which have traditionally supplied such fuels, but the fact that such fuel are finite in nature and due to be substantially exhausted in the not too distant future. It is interesting to note that the political and social turmoil associated with traditional sources of fossil fuels has given rise to the justification for many special interest groups in the developed world to call for "drilling closer to home". This view often ignores the fact that fossil fuel in the developed world often lies in "difficult to reach" and technologically challenging areas, which do not lend themselves to relatively risk-free exploration and exploitation. Recent environmental disasters, such as the oil spill in the Gulf of Mexico is a clear and undisputable indication of the dangers associated with "drilling closer to home". Consequently, to get out of our energy conundrum, it seems that our societies have no choice but to review and question the way our economies generate and utilize energy. Most studies of this nature reveal the wasteful and unsustainable processes and approaches which we have so far used in energy production and use. Conversion of one form of energy into another, transmission of energy from one place to another, distribution of energy through our urban and rural communities, and management of energy resources have all been imperfect, to say the least. Such wasteful approaches to energy use have been the hallmark of the last century, which has now come back to haunt us in terms of devastating consequences associated with Climate Change. It is in that light that Smart Grid has been inadvertently positioned as the silver bullet to address the Climate Change and Energy Independence issues. Smart Grid is expected to enable unprecedented degrees of conservation, efficiencies and utilization of alternative sources of energy, thus substantially reducing this century's dependence on fossil fuels. It is notable that regardless of which development category they belong to, the developed countries, as well as the developing countries, have put together ambitious plans for the development of next generation electric grid, also called Smart Grid, as the main engine for the development of their economies and the well-being of their population. However, the fact remains that Smart Grid is still a collection of concepts and ideas, whose full impact cannot be realized until a rich portfolio of innovative technologies, system architectures, integration solutions and social-economic components are available cost-effectively and in concert to address the energy supply and demand issues which individual countries across the world are grappling with. And as such, energy independence should be perceived by the world community as a global problem longing for global solutions. As will be demonstrated in the rest of this chapter, Information and Communication Technologies are poised to play a critical role in bringing about the full spectrum of functionalities which Smart Grid promises. After all, Smart Grid is all about pervasive monitoring and control, which could not be realized without a comprehensive blanket of communication technologies, encompassing all utility assets, and enabling the intelligence implanted in each node to contribute to the overall system capabilities and functionalities which Smart Grid is expected to provide., book chapter, Book published
Smart microgrids
The utility sector's transition to renewable energy and the smart grid has already begun. The first step towards smart grid is microgrid, which is a smaller electricity grid with access to all the essential assets of a larger grid. This book provides a glimpse into an actual microgrid project. It supplies a system-level approach to the design of smart Microgrids, covering the entire design process-from roadmap to realization. Detailing lessons learned and pitfalls to avoid in Microgrid technology, the book provides an interdisciplinary approach to design and problem solving for smart microgrids., Book, Published.
The Smartphone Peer Physical Activity Counseling (SPPAC) program for manual wheelchair users
Physical activity (PA) must be performed regularly to accrue health benefits. However, the majority of manual wheelchair users do not meet PA recommendations. Existing community-based PA programs for manual wheelchair users appear to work, but effect sizes are small and retention is low. Existing PA programs may not fully implement some psychosocial factors that are strongly linked with PA (eg, autonomy). The use of peers and mobile phone technology in the Smartphone Peer PA Counseling (SPPAC) program represents a novel approach to cultivating a PA-supportive environment for manual wheelchair users., Peer-reviewed article, Published.
Sound transmission loss of extensive green roofs
A study was conducted to review the acoustical features and the potential contributions of green roofs to the acoustical environment, to investigate sound transmission theory, and to report on new empirical findings on the transmission loss of green roofs. The results of the study shows that existing sound transmission algorithms do not adequately predict TL of light-weight roof system or green roofs, nor describe the potential effect of moisture content of the substrate. The sound energy is dissipated in the substrate and provides a mass loading and damping effect on to the light-weight roof deck. The study also suggested that green roofs will provide a higher TL than the additional ceiling element and improve TL throughout the full architectural frequency range, specifically desirable in residential and institutional occupancies that are developed below aircraft flight paths., Article, Published.
Spatial bistability generates hunchback expression sharpness in the drosophila embryo
During embryonic development, the positional information provided by concentration gradients of maternal factors directs pattern formation by providing spatially dependent cues for gene expression. In the fruit fly, Drosophila melanogaster, a classic example of this is the sharp on-off activation of the hunchback (hb) gene at midembryo, in response to local concentrations of the smooth anterior-posterior Bicoid (Bcd) gradient. The regulatory region for hb contains multiple binding sites for the Bcd protein as well as multiple binding sites for the Hb protein. Some previous studies have suggested that Bcd is sufficient for properly sharpened Hb expression, yet other evidence suggests a need for additional regulation. We experimentally quantified the dynamics of hb gene expression in flies that were wild-type, were mutant for hb self-regulation or Bcd binding, or contained an artificial promoter construct consisting of six Bcd and two Hb sites. In addition to these experiments, we developed a reaction-diffusion model of hb transcription, with Bcd cooperative binding and hb self-regulation, and used Zero Eigenvalue Analysis to look for multiple stationary states in the reaction network. Our model reproduces the hb developmental dynamics and correctly predicts the mutant patterns. Analysis of our model indicates that the Hb sharpness can be produced by spatial bistability, in which hb self-regulation produces two stable levels of expression. In the absence of self-regulation, the bistable behavior vanishes and Hb sharpness is disrupted. Bcd cooperative binding affects the position where bistability occurs but is not itself sufficient for a sharp Hb pattern. Our results show that the control of Hb sharpness and positioning, by hb self-regulation and Bcd cooperativity, respectively, are separate processes that can be altered independently. Our model, which matches the changes in Hb position and sharpness observed in different experiments, provides a theoretical framework for understanding the data and in particular indicates that spatial bistability can play a central role in threshold-dependent reading mechanisms of positional information., Peer-reviewed article, Published. Received October 16, 2007; Accepted August 13, 2008; Published September 26, 2008.
Spectrum hierarchies and subdiagonal functions
Proceedings of the 18th IEEE Symposium on Logic in Computer Science (LICS-03), Ottawa, ON, 2003. The spectrum of a first-order sentence is the set of cardinalities of its finite models. Relatively little is known about the subclasses of spectra that are obtained by looking only at sentences with a specific signature. In this paper, we study natural subclasses of spectra and their closure properties under simple subdiagonal functions. We show that many natural closure properties turn out to be equivalent to the collapse of potential spectrum hierarchies. We prove all of our results using explicit transformations on first-order structures., Conference paper, Published.
Spinal cord injury and type 2 diabetes
Objective: The objective of this study was to evaluate the association between spinal cord injury (SCI) and type 2 diabetes in a large representative sample and to determine whether an association exists irrespective of known risk factors for type 2 diabetes. Methods: Data were obtained on 60,678 respondents to the Statistics Canada 2010 Cycle of the cross-sectional Canadian Community Health Survey. Multivariable logistic regression, incorporating adjustment for confounders and probability weights to account for the Canadian Community Health Survey sampling method, was conducted to quantify this association. Results: After adjustment for both sex and age, SCI was associated with a significant increased odds of type 2 diabetes (adjusted odds ratio = 1.66, 95% confidence interval 1.16–2.36). These heightened odds persisted after additional adjustment for smoking status, hypertension status, body mass index, daily physical activity, alcohol intake, and daily consumption of fruits and vegetables (fully adjusted odds ratio = 2.45, 95% confidence interval 1.34–4.47). Conclusions: There is a strong association between SCI and type 2 diabetes, which is not explained by known risk factors for type 2 diabetes., Peer-reviewed article, Published. Received May 14, 2013 ; Accepted August 21, 2013.
Spinal cord injury influences psychogenic as well as physical components of female sexual ability
Study Design: Secure, web-based survey. Objectives: Elicit specific information about sexual function from women with spinal cord injuries (SCI). Setting: World-wide web. Methods: Individuals 18 years or older living with SCI obtained a pass code to enter a secure website and then answered survey questions. Results: Bladder and/or bowel incontinence during sexual activity and/or sexual intercourse were significant concerns and prevented some women from seeking sexual activity. Autonomic dysreflexia (AD) during sexual activity was interpreted negatively by many and was found to interfere with sexual activity. Most subjects reported difficulty becoming psychologically aroused as well as physically aroused, which were both correlated with feeling that their SCI had altered their sexual sense of self. An inverse relationship existed between developing new areas of arousal above the level of lesion and not having sensation or movement below the lesion. The most commonly reported sexual stimulation leading to the best arousal involved stimulation of the head/neck and torso areas. The majority of subjects reported having experienced intercourse postinjury. Most participants reported difficulty with positioning during foreplay and intercourse, vaginal lubrication, and spasticity during intercourse. Almost half reported experiencing orgasm postinjury and this was positively associated with the presence of genital sensation. Conclusion: SCI significantly impairs psychological and physical aspects of female sexual arousal. In addition, bladder and bowel incontinence as well as AD negatively impact sexual activity and intercourse., Peer-reviewed article, Published.
A state-of-the-art on concrete repairs and some thoughts on ways to achieve durability in repairs
Thee aim of this chapter is to provide the reader with a general overview of the different phenomena and factors involved with durability of repair and suggest the major aspects which the repair design should focus on. However, it is important to keep in mind that any repair problem needs to be addressed as a unique problem first, and the designer, by developing awareness of the several challenges involved, should be able to make mindful choices, adequate to the specific application that is being considered., Book chapter, Published.
Stochastic dynamics of gene expression in developing fly embryos
Proceedings of 2017 International Conference on Noise and Fluctuations (ICNF), Vilnius, Lithuania on 20-23 June 2017. Segmentation of the developing insect body is preceded by cell-specific gene expression. In fruit flies (Drosophila), pair-rule genes are expressed in spatial stripes specifying segment fates. Transcription of the even-skipped (eve) pair-rule gene was recently shown to proceed in noisy bursts. Here, we develop a stochastic model of eve transcription from DNA to mRNA. This indicates that eve transcription proceeds at two rates, with a slow rate providing basal production and a fast rate allowing for high mRNA output. This two-rate transcription may afford more reliability in mRNA output, and therefore the protein levels which specify cell type, than a simple on-off (one-rate) mechanism., Conference paper, Published.
Storage and the shift to low carbon energy
This work looks at the impact of assumptions made regarding efficiency of storage systems used with variable energy resources and how this applies to a solar PV installation. To find the optimal storage system to work with the cyclic solar output, a linear optimization model is implemented using OSeMOSYS. With 100% efficient, free storage, with no capacity restrictions, it is possible to get down to almost 5 GW of required solar installed capacity, but it requires 1.1 TWh of 100% efficient storage. Existing pumped hydro storage facilities have efficiencies between 70 and 80%, which increase these numbers to 7 GW and 1.2 TWh. With a storage model based on the worlds largest pumped hydro facility between 20 and 25 GW of installed solar capacity are required plus between 15 and 30 GWh of storage capacity to meet the 1 GW load. The capital infrastructure required to allow a solar installation to meet that of a baseload plant is therefore around an order of magnitude larger than what is commonly assumed. A shift away from fossil fuels to renewable/variable energy resources will require more infrastructure than indicated by simply considering the capacity factor of the energy source., Peer-reviewed article, Published. Manuscript received September 30, 2014; revised January 18, 2015.
Strengthening of timber beams using externally-bonded sprayed fibre reinforced polymers
The use of Fibre Reinforced Polymers (FRP) has grown in popularity in the construction industry. FRP has proven useful in the retrofit of various types of structural elements. It may be used for the strengthening of beams, the seismic upgrade of walls panels, as well as the jacketing of columns to provide confinement. There exist several methods of FRP application for the case of structural retrofits. These include the application of pre-prepared FRP mats, or application of FRP via the wet lay-up process. However, a new technique developed at the University of British Columbia allows for the application of FRP in the form of a spray. Externally bonded Sprayed FRP (SFRP) is known to increase strength and energy absorption capacity of a retrofitted member as well as, or better than, FRP sheets. However, tests have primarily been carried out on concrete members only. An area of interest, into which not much research has been conducted, is the application of SFRP to timber. Timber bridges are extensively used in many parts of the world. Often due to remoteness and practical constraints, it is impossible to apply FRP sheets to retrofit these bridges. SFRP would be a much easier method of FRP application. This study looked at the application of SFRP to Douglas Fir (D.Fir) Beam specimens subjected to 3-Point Flexural Loading only. The specimens were treated with either a water based (Borocol) or oil borne (Creosote) antifungal preservative prior to being sprayed with FRP. Different combinations of adhesives/bonding agents including Hydroxymethylated Resorcinol and Polymeric Isocyanates were used to try to develop a strong bond. When considering using only chemical adhesives to obtain a proper bond between the two constituents of the composite, use of HMR is recommended for timber which is untreated or has been treated with a water borne preservative such as Borocol, while a pMDI adhesive such as AtPrime 2 is recommended for timber treated with an oil borne preservative such as Creosote. For Non Creosoted beams, adhesives did not generate as significant of a strength gain. For Creosoted beams, adhesives may be sufficient to generate significant strength gain when SFRP is applied to a beam. Considering that most structures in use would probably have been treated with a preservative similar to Creosote, in practice, AtPrime 2 or some other some sort of pMDI would probably be the adhesive of choice. Based on the results of the study, it is possible to say that the application of SFRP to retrofit/rehabilitate timber structures shows considerable promise. If a decent bond is achieved between the composite constituents, it is possible to substantially increase the ultimate flexural strength of the member, as well as drastically increase its ductility and energy absorption capacity. It is recommended that further tests be carried out using different types of loading schemes, geometrical configurations of SFRP, other types of anchorage, and development of a proper analytical model before the method is adopted for widespread use., Thesis, Published.
Structured documents
Proceedings of 2012 European Intelligence and Security Informatics Conference (EISIC) in Odense, Denmark 22-24 Aug. 2012. Much of the information exchanged between agents over a network is encapsulated in XML documents. An XML document has a tree structure, and the meaning of the document can be understood in terms of a set of label-value pairs. The content of a document is often secured through digital signatures applied to different sections, while the document is passed between several agents. In this paper, we illustrate that this process is insecure in the sense that a malicious agent can deceive an honest agent to hold beliefs that are untrue. We provide a formal framework for analyzing the security of structured documents, based on the implicit epistemic impact that a signed document will have on a recipient. This kind of analysis can provide significant insight into deception and fraud detection., Conference paper, Published.
Student emotions with an edu-game
Proceedings of 2013 Humaine Association Conference on Affective Computing and Intelligent Interaction, Geneva, Switzerland, 2-5 Sept. 2013. We present the results of a study that explored the emotions experienced by students during interaction with an educational game for math (Heroes of Math Island). Starting from emotion frameworks in affective computing and education, we considered a larger set of emotions than in related research. For emotion labeling, we employed a standard method that relies on trained judges to report emotions over 20-second intervals. However, we asked judges to report all observed emotions in each interval, as opposed to only choosing one, as is standard practice. This variation allows us to discuss the appropriateness of this interval for emotion labeling. We present a detailed analysis of inter-coder reliability, both aggregated and over individual students, that considers not only the matching by judges over emotion type, but also the number of emotions detected., Conference paper, Published., Peer reviewed

Pages