BCIT Citations Collection | BCIT Institutional Repository

BCIT Citations Collection

Pages

A geometric modelling framework for conceptual structural design from early digital architectural models
Computer support for conceptual structural design is still ineffective. This is due, in part, to the fact that current computer applications do not recognize that structural design and architectural design are highly interdependent processes, particularly at the early stages. The goal of this research is to assist structural engineers at the conceptual stage with early digital architectural models. This paper presents a geometric modeling framework for facilitating the engineers’ interactions with architectural models in order to detect potential structural problems, uncover opportunities, respect constraints, and ultimately synthesize structural solutions interactively with architectural models. It consists of a process model, a representation model and synthesis algorithms to assist the engineer on demand at different stages of the design process. The process model follows a top-down approach for design refinements. The representation model describes the structural system as a hierarchy of entities with architectural counterparts. The algorithms rely on geometric and topologic relationships between entities in the architectural model and a partial structural model to help advance the synthesis process. A prototype system called StAr (Structure–Architecture) implements this framework. A case study illustrates how the framework can be used to support the conceptual structural design process., Peer reviewed, Peer reviewed article, Received 24 October 2005 ; Revised 5 February 2007 ; Accepted 8 March 2007 ; Available online 3 December 2007., Geometric modeling, Conceptual structural design, Integrated design, Architectural design
Getting serious about sustainability
One-planet living represents the per capita share of global ecosystem services that each person on Earth could use were humanity to live equitably within ecological carrying capacity. My research uses ecological footprint analysis to explore the potential for the City of Vancouver to achieve one-planet living. Specifically, I examine what reductions in per capita ecological footprint would be necessary, what policies or changes to management practices are available to the City to facilitate those reductions, and what one-planet living might “look like” if those policies and changes to urban management practices were implemented. I use 2006 data to conduct an integrated urban metabolism and ecological footprint assessment for the City in order to establish a baseline from which to estimate the necessary reductions in material and energy consumption. I develop lifestyle archetypes of societies living at a one-planet ecological footprint (both real and hypothetical) to inform estimates on how changes in diet, buildings, consumables and waste, transportation and water could achieve one-planet living in Vancouver. I also draw on examples from the international sustainable cities literature and interviews with City of Vancouver and Metro Vancouver staff and elected representatives to develop policy proposals for reducing Vancouver’s ecological footprint. Getting to one-planet living in Vancouver requires at least a 58% reduction in the per capita ecological footprint with the greatest contributions coming from reducing food waste, red meat consumption, and virtually eliminating personal motor vehicle use (shifting instead to an 86% walk, cycle and transit mode share which the City already achieves in its Downtown). The City has and can continue to influence individual and corporate choices through zoning and permitting. However, citizens would have to accept lifestyle changes pertaining to food and personal consumption to achieve the one-planet living goal. Involvement by senior governments in reducing the ecological footprint is also required. It remains to be seen whether Vancouverites, or any population accustomed to modern consumer lifestyles, will voluntarily accept and implement the changes necessary to achieve equitable sustainability as articulated by one-planet living., Thesis, Published.
A greenhouse gas emissions inventory and ecological footprint analysis of Metro Vancouver residents’ air travel
Ecological Footprint Analysis (EFA) at the city or regional scale does not typically include air travel due to a lack of readily available data. However, knowing the “load” placed on nature by various lifestyle choices, including air travel, is essential if we hope to enable society to live sustainably within ecological limits. This paper provides methods for including air travel in urban EFA, in a manner that is accessible to those that are interested in the complexities of urban sustainability. Our goal is to use the case of the Vancouver Metropolitan region to illustrate two methods in such a way that they can be replicated or adapted for use in other cities and regions. We found that the greenhouse gas emissions of air travel by Metro Vancouver residents for 2006 is between 1,191,070 and 1,402,420 tonnes of carbon dioxide equivalent (tCO2e). The resulting ecological footprint is between 287,030 and 337,980 global hectares (gha), or between 0.136 and 0.160 gha/capita. The dedicated carbon sink required to neutralize the carbon dioxide emissions from Metro Vancouver residents’ air travel alone is equivalent to twice the land area of the region (283,183 hectares)., Peer-reviewed article, Published. Received: July 15, 2013 ; Accepted: September 16, 2013 ; Online Published: September 27, 2013.
Heat, air and moisture transport properties of several North American bricks and mortar mixes
Hygrothermal models are emerging as practical building design tools. These models require a set of reliable inputs to provide results that are meaningful to the designers. One of these inputs is the set of heat, air and moisture transport properties of materials. For any given class of building materials the properties may vary within a broad range. This paper reports the porosity, density, matrix density, thermal conductivity, equilibrium moisture content, water vapor permeability, water absorption coefficient, liquid diffusivity and air permeability of six types of bricks and four mortar mixes that are commonly used in North America. The experimental and analytical procedures follow either international standards or well-established methodologies., Peer reviewed article, Published. Received 9 July 2003; accepted 17 March 2004.
Heat, air and moisture transport properties of three North American stuccos
Heat, air, and moisture transfer models that are used as practical building design tools require reliable inputs to provide meaningful results. One of these inputs is the set of heat, air, and moisture transport properties of materials. For any given class of building materials the properties may vary within a broad range. This paper reports the porosity, density, matrix density, thermal conductivity, equilibrium moisture content, water vapor permeability, water absorption coefficient, liquid diffusivity, and air permeability of regular lime stucco, regular Portland cement stucco, and acrylic stucco that are commonly used in North America. The experimental and analytical procedures follow either international standards or well-established methodologies., Peer reviewed article, Published. Received 9 January 2004; accepted 13 October 2005; published online 25 January 2006.
Hedging the risk of increased emissions in long term energy planning
The feasibility of meeting emission targets is often evaluated using long range planning optimization models in which the targets are incorporated into the system constraints. These models typically provide one ‘optimal’ solution that considers only a deterministic representative value of emissions for each technology and do not consider the risk of exceeding expected emissions for a given optimal solution. Since actual emissions for any given technology are uncertain, implementation of such an optimal solution carries inherent risk that emissions will exceed the given target. In this paper, we implement a stochastic risk structure into the OSeMOSYS optimization model to incorporate uncertainty related to the emissions of electricity generation technologies. For a given risk premium, defined as the additional amount that society is willing to pay to reduce the risk of exceeding the cost optimal system emissions, we determine the generation technology mix that has the lowest risk of exceeding this baseline. We focus on emissions risk since the literature on emissions risk is sparse while the literature on other risks such as policy risks, financial risks and technological risks is extensive. We apply the model to a case study of a primarily fossil based jurisdiction and find that, when risk is incorporated, solar and wind technologies are built out seven and five years earlier respectively and that carbon free technologies such as coal with carbon capture and storage (CCS) become effective alternatives in the energy mix when compared to the ‘optimal’ solution without consideration of risk, though this does not include the risk of carbon leakage from CCS technologies. If nuclear is included as a generation option, we find that nuclear provides an effective risk hedge against exceeding emissions., Peer-Reviewed Article, Final article published. Available online 12 February 2017., Peer reviewed
Hemp Waste Valorization as Biofuel and Cement Replacement in Cement and Concrete Production
The growing interest in industrial applications of the hemp plant requires alternative solutions for disposing of hemp waste. At the same time, the concrete industry is seeking ways to reduce its environmental impact, which could be realized by partially replacing Portland cement with more sustainable materials. In this study, a two-step valorization strategy of hemp waste is explored, including the use of hemp waste as biofuel and the addition to concrete of the biofuel by-product, hemp ash, as partial cement replacement. Hemp waste was incinerated in a muffle furnace at different combustion regimes and the residual hemp ash was analyzed before being added to some concrete mixes. Concretes with different hemp ash replacements (5–25% by cement weight) were tested for compression strength, air content, workability, and water absorption. Results showed that hemp ash has the potential to be added to concrete as a filler to reduce environmental impact and costs at 5% cement replacement., Peer reviewed, Article, Received: December 10, 2019. Accepted: March 27, 2020. Published online: April 2, 2020., Incineration, Hemp biomass, Biofuel, Hemp ash, Supplementary cementing materials, Cement, Concrete
How do accelerated carbonation tests affect the natural morphology and transport characteristics of concrete?
Carbonation in concrete is a natural chemical process by which atmospheric CO2 reacts with calcium oxide in the Ca(OH)2 and CSH phases in hydrated cement paste to form CaCO3. The carbonation rate in the atmosphere is too slow for laboratory testing, and therefore, it is usually accelerated by using relatively higher CO2 concentrations. However, there exists some disagreement as to what CO2 concentration, humidity and temperature should be specified when conducting an accelerated carbonation test. In this study, samples of hydrated cement paste were carbonated at different CO2 concentrations, and analysed using the x-ray diffraction technique. The results show that the morphology of CaCO3 formed at higher CO2 concentrations is different from that of CaCO3 formed at natural concentrations. It should be recognized that the diffusion coefficient measured at higher concentrations will not be exactly the same as that from naturally carbonating concrete due to the formation of these morphologically different products., Article, Published.
How post-secondary students with mathematics learning disabilities use their personal electronic devices to support their academic studies
General report about exploratory study of how post-secondary students with mathematics learning disabilities use and adapt their use of their personal electronic devices to support their academic studies., Not peer reviewed, Article
How to qualify an analytical laboratory for analysis of herbal dietary ingredients and avoid using a "dry lab"
For better or for worse, many of the simple, unprocessed, and easily identifiable herbs of a bygone era can be found in retail commerce only rarely and with some degree of difficulty. Many modern botanical products intended for health-related purposes are, for the most part, quite complicated, often requiring additional testing for authentication of identity and for the presence of accidental or intentional adulterants, including contaminants such as heavy metals, pesticides, noxious microbes, and mycotoxins. As knowledge on the composition and properties of herbs has evolved, so too has the ability to evaluate those properties (e.g., marker compounds) using technology. The modern world also superimposes itself on commerce in the form of smelters, internal combustion engines, fecal coliforms, leaded gasoline, pesticides, prescription drugs, and other noxious substances that necessitate testing in addition to evaluating the inherent properties of the raw materials and finished products. No evaluation of herbal quality would be complete without some means of assuring that these and other unintentional contaminants are absent. In addition to an individual manufacturer’s desire to create and sell only the highest quality products, there are significant regulatory requirements surrounding the sale of botanical goods. Whether they are called natural health products (Canada), therapeutic goods (Australia), dietary supplements (United States), or phytomedicines (Europe), there are regulatory requirements to set specifications and to test for conformity with those specifications. Thus, the laboratory enters the scene., Article, Published.
Hygrothermal modeling of aerated concrete wall and comparison with field experiment
Proceedings of 3rd International Building Physics Conference: 27 August 2006, Montreal, QC. A two-dimensional heat, air and moisture transport model called hygIRC is adapted to simulate a well-documented field exposure of an aerated concrete wall section. Difficulties are encountered due to a few missing information on boundary conditions of the exposure and hygrothermal properties of aerated con-crete. The paper presents how these inadequacies were overcome to simulate the hygrothermal behavior of the wall section. Appropriate assumptions were made due to justifiable reasons. Then the model provides temporal and spatial distributions of temperature and relative humidity for an extended period that are in ex-cellent agreement with the documented field data. The paper presents the justifications for the assumptions and the comparison of experimental and simulation results., Conference paper, Published. A version of this document is published in: 3rd International Building Physics Conference, Montreal, QC., August 27, 2006, pp. 321-328.
Hygrothermal performance assessment of vented and ventilated wall systems
Proceedings of Thermal Performance of the Exterior Envelopes of Whole Buildings XII International Conference, At Clearwater Beach, Florida, USA, December 2013. Based on analysis of the drying and wetting potentials of a particular local climate, designers choose wall systems with or without an air gap between a sheathing membrane and a cladding layer. In addition to the capillary break that the air gap provides, thereby reducing the moisture transfer from wet cladding to the interior of the wall, the airspace will add the thermal resistance of the wall system and reduce the heat flow across the wall system. These moisture and thermal performances are straightforward to understand if the air in the air cavity is assumed to be a “still air.” In this paper, an experimental study is undertaken to under-stand the impact of airflow through an air cavity on the moisture and thermal performance of wall systems. To achieve this objective three test panels are instrumented and monitored in the field-experimental setting: one with no air gap, another one with an air gap but restricted airflow, and the third one with an air gap and open for airflow. The second and third wall systems have the same air gap width but different top flashing designs creating vented and ventilated wall systems. For the wall systems’ orientation and boundary conditions considered in this study, the wall with no air gap accumulates relatively high moisture content on the sheathing board, stud, and bottom plate and also has high moisture content changes in a year cycle when compared to the vented and ventilated wall systems. In general, the hygrothermal performances of vented and ventilated wall systems are comparable. During the winter period when relatively high moisture accumulation occurs, the upper section of the ventilated wall system shows slightly lower moisture content compared to that of the vented wall system. The temperature readings of the sheathing boards in the vented and ventilated wall systems are slightly warmer than that of the wall with no air gap for 85.5% and 73% of the time (based on hourly data of a year), respectively. For the balance of a period of time, the sheathing boards in the walls with an air cavity are slightly cooler than that of the wall with an air gap. Although the low temperature on the sheathing board, which is caused by solar radiation-induced airflow, is beneficial during a cooling season, the air gap and the associated airflow may reduce the heat gain that may be obtained from solar radiation during the heating season. The implications of air cavity and flashing design (airflow rate) on the heating and cooling load calculations of different orientations, wall configurations, and climate require further investigation., Conference paper, Published.

Pages