BCIT Citations Collection | BCIT Institutional Repository

BCIT Citations Collection

Impact of V2G on real-time adaptive Volt/VAr optimization of distribution networks
Proceeding of IEEE ElectricalPower and Energy Conference (EPEC 2013), Aug. 2013, Halifax, Canada. Deployment of Smartgrid downstream features such as Smart Metering, pervasive control and Distributed Management Systems has brought great opportunities for distribution network planners to optimize the network in more precise methods. Moreover, the advent of Electric Vehicles (EVs) has brought more opportunities for grid optimization. Recent studies stipulate that EVs are able to inject reactive power into the grid by changing their inverter's operating mode. This paper primarily discusses a real-time adaptive Volt/VAr Optimization (VVO) engine, designed to minimize system apparent power losses, optimize voltage profiles, and reduce the operating costs of Switched Capacitor Banks of the grid. The paper goes on to study the impact of EVs on the distribution network VVO, taking into account different EV charging and penetration levels and checks the validity of the proposed algorithm by employing revised IEEE-37 Node Test Feeder in presence of various load types as a case study., Conference paper, Published.
Multi-agent control system for real-time adaptive VVO/CVR in Smart Substation
Proceedings of IEEE Electrical Power And Energy Conference, London, Ontario, Oct. 2012. This paper proposes a multi-agent based control system for real-time and adaptive Volt/VAR Optimization (VVO) and Conservation Voltage Reduction (CVR) in Smart Substations. The design and implementation of the proposed distributed control system using agent technology is discussed in the paper. Furthermore, the architecture, tasks and limits of each Intelligent Agent (IA) as a component of a multi-agent system (MAS) have been explained. A number of control functions are simulated and the results are presented in the paper. The results obtained demonstrate the potential of MAS for improving the efficiency of the system., Conference paper, Published.
Real-time adaptive VVO/CVR topology using multi-agent system and IEC 61850-based communication protocol
This paper proposes a new approach for real-time and adaptive Volt/VAr optimization (VVO)/conservation voltage reduction (CVR) system using Intelligent Agents, communicating through IEC 61850 Goose Messaging Protocol. The paper also proposes new real-time adaptive VVO/CVR algorithms tailored for different service level targets and system topologies. The paper argues that each of these variations requires different Intelligent Agent Systems, data structures, and communication requirements. To test the applicability of the VVO/CVR optimization engine, a modified IEEE 34 Node system is used as case study., Article, Published
Real-time co-simulated platform for novel Volt-VAR Optimization of smart distribution network using AMI data
Accepted in IEEE International Conference on Smart Energy Grid Engineering, May 2015. This paper presents a real-time co-simulated platform for novel voltage and reactive power optimization (VVO) of distribution grids through a real-time digital simulator (RTDS) in presence of a reliable communication platform. The proposed VVO engine is able to capture quasi real-time data from local Advanced Metering Infrastructure (AMI) and optimizes the distribution network for each quasi real-time stage (every 5 minutes) based on system main characteristics (i.e. active/reactive power of nodes). At each time stage, the VVO engine tries to minimize losses in the distribution network as well as to improve the voltage profile of the system. In order to test robustness, performance and the applicability of proposed Volt-VAR Optimization engine, a 33 node distribution network has been modeled and studied in a real-time Co-simulated environment by real-time simulator (RTDS) and a real communication platform with DNP.3 protocol. The preliminary results prove well-performance of proposed AMI-based VVO engine and show that the engine enables system to achieve higher level of loss/operating cost reduction through a sophisticated optimization engine compare with conventional approaches., Conference paper, Published.
Real-time co-simulation platform for Smart Grid Volt-VAR Optimization using IEC 61850
This paper presents an implementation of an IEC 61850-based real-time co-simulation platform for verification of the performance of a volt-VAR optimization (VVO) engine for smart distribution networks. The proposed VVO engine is able to minimize grid loss, volt-VAR control asset operational costs, and conservation voltage reduction operational costs through its comprehensive objective functions, weighted by fuzzification using advanced metering infrastructure (AMI) data. The optimization engine receives the AMI data stream through measurement aggregators. Moreover, it sends control commands to volt-VAR control components modeled in real-time digital simulator (RTDS) through DNP.3 protocol. To check the performance and the precision of proposed VVO, a fault scenario is imposed upon the system. IEC 61850 GOOSE messages are generated and sent to change the status of specified breakers, while the VVO engine receives system reconfiguration commands via IEC61850 Manufacturing Message Specification (MMS) protocol. The results of the study on 33-node feeder showed adequate performance of proposed VVO in grid operating scenarios., Article, Published.
Real-time communication platform for Smart Grid adaptive Volt-VAR Optimization of distribution networks
Proceeding of IEEE International Conference on Smart Energy Grid Engineering (SEGE), Aug. 2015, Oshawa, ON, Canada. This paper investigates a real-time communication platform for a Smart Grid adaptive Volt-VAR Optimization (VVO) engine. Novel VVO techniques receive inputs from Advanced Metering Infrastructure (AMI) to dynamically optimize distribution networks. As communication platform design and characteristics affect Smart Grid-based VVO performance in terms of control accuracy and response time, VVO ICT studies is essential for grid planners and/or power utilities. Hence, this paper primarily introduces a real-time co-simulated environment comprised of Smart Grid adaptive VVO engine, RTDS model and system communication platform using DNP3 protocol. This platform is built to test and asses the influence of different components included in Smart Grid monitoring and control system; namely the sensors, measurement units, communication infrastructure on the operation and control of VVO. Moreover, this paper uses a real-time platform to check the robustness of the monitoring and control applications for communication network considerations such as delays and packet loss. Next, this paper investigates how such a platform could look into communication issues while taking system requirements into consideration. A 33-node distribution feeder is employed to check system performance through communication parameters such as throughput and response time., Conference paper, Published.