| Application of hygrothermal analyses to optimize exterior wall design | Fitsum Tariku |
| Variations in the hygrothermal properties of several wood-based building products | Fitsum Tariku |
| Application of modeling tool to assess moisture and thermal performance of retrofitted wall assemblies | Fitsum Tariku |
| Assessment of building retrofit options using hygrothermal analysis tool | Fitsum Tariku |
| Hygrothermal modeling of aerated concrete wall and comparison with field experiment | Fitsum Tariku |
| Investigation of the moisture buffering potential of magnesium oxide board | Fitsum Tariku |
| Verification and validation | Fitsum Tariku |
| Use of hygrothermal numerical modeling to identify optimal retrofit options for high-rise buildings | Fitsum Tariku |
| Energy rating of polyurethane spray foamed walls | Fitsum Tariku |
| Hygrothermal performance of exterior wall systems using an innovative vapour retarder in Canadian climate | Fitsum Tariku |
| Hygrothermal performance of RH-dependent vapour retarder in Canadian coastal climate | Fitsum Tariku |
| Evaluation of the thermal performance of innovative pre-fabricated wall systems through field testing | Fitsum Tariku |
| EE13-2 development and benchmarking of a new whole building hygrothermal model | Fitsum Tariku |
| NRC-IRC develops evaluation protocol for innovative vapour barrier | Fitsum Tariku |
| Development and benchmarking of a new hygrothermal model | Fitsum Tariku |
| Thermostat setback effect in whole building performance | Fitsum Tariku |
| Hygrothermal properties of exterior claddings, sheathing boards, membranes and insulation materials for building envelope design | Fitsum Tariku |
| Simulation of wind-driven rain effects on the performance of a stucco-clad wall | Fitsum Tariku |
| Hygrothermal performance of ventilated attic in marine climate under different ceiling air tightness | Fitsum Tariku |
| Indoor humidity levels of houses in Pacific coastal climate | Fitsum Tariku |
| Improved dynamic friction models for simulation of one-dimensional and two-dimensional stick-slip motion | Fitsum Tariku |
| Moisture response of sheathing board in conventional and rain-screen wall systems with shiplap cladding | Fitsum Tariku |
| Attic baffle size and vent configuration impacts on attic ventilation | Fitsum Tariku |
| Experimental investigation of the wetting and drying potentials of wood frame walls subjected to vapor diffusion and wind-driven rain loads | Fitsum Tariku |
| A computation of U-Factor for an entire vented attic assembly using a 2D model | Fitsum Tariku |
| Effect of attic insulation thickness and solar gain in a mild climate | Fitsum Tariku |
| Phase change material's (PCM) impacts on the energy performance and thermal comfort of buildings in a mild climate | Fitsum Tariku |
| Experimental investigation of moisture transfer between concrete foundation and sill plate | Fitsum Tariku |
| Temperature and air flow patterns in attic roofs | Fitsum Tariku |
| Performance-risk analysis for the design of high-performance affordable homes | Fitsum Tariku |
| Heat, air and moisture transport properties of several North American bricks and mortar mixes | Fitsum Tariku |
| Heat, air and moisture transport properties of three North American stuccos | Fitsum Tariku |
| Application of hygrothermal modeling tool to assess moisture response of exterior walls | Fitsum Tariku |
| Assessment of energy rating of polyurethane spray foam walls | Fitsum Tariku |
| Integrated analysis of whole building heat, air and moisture transfer | Fitsum Tariku |
| The need for an accurate indoor humidity model for building envelope performance analysis | Fitsum Tariku |
| Hygrothermal performance assessment of vented and ventilated wall systems | Fitsum Tariku |
| Preliminary results from field experimental study of rain load and penetration into wood-frame wall systems at window sill defects | Fitsum Tariku |
| Temperature and humidity distributions in mid-rise residential building suites | Fitsum Tariku |
| Determination of indoor humidity profile using a whole-building hygrothermal model | Fitsum Tariku |
| Transient model for coupled heat, air and moisture transfer through multilayered porous media | Fitsum Tariku |
| Application of a Whole-Building Hygrothermal model in energy, durability, and indoor humidity retrofit design | Fitsum Tariku |
| Seasonal indoor humidity levels of apartment suites in a mild coastal climate | Fitsum Tariku |
