Attic baffle size and vent configuration impacts on attic ventilation
Tariku, F., & Iffa, E. (2015). Attic baffle size and vent configuration impacts on attic ventilation. Building And Environment, 89, 28-37. doi:https://doi.org/10.1016/j.buildenv.2015.01.028
Description
The international residential code (IRC) and most building codes in North America provide attic ventilation codes which allow a certain minimum venting area with an unblocked space by the ceiling insulation. Most of these codes have similar minimum venting ratio, minimum space gap between the roof sheathing and ceiling insulation and vent area location for similar climatic conditions. In this paper, the effects of varying the gap between roof sheathing and ceiling insulation (baffle size) and the locations of vent area under both summer and winter conditions are investigated. Three different baffle sizes and three different locations of the attic vent are used to study their effect on the air distribution and temperature profile inside the attic space. A CFD model is developed and validated using existing experimental measurements. Results show that increasing baffle size hugely affects the air distribution when the air flow is majorly driven by wind. The upper side roof vents have been located at three different locations and our findings show when the upper vent is placed the furthest from the ridge the Air Change per Hour (ACH) value in the attic increases but the air circulation is minimal in the top parts of the attic space and structural elements., Peer-reviewed article, Published. Received 29 November 2014, Revised 26 January 2015, Accepted 28 January 2015, Available online 7 February 2015.
